Board-level

The board is not dead. One part on it is.

Component-level logic board repair for MacBook, iMac, Mac mini, iPhone and iPad — liquid damage, shorts, no power and dead displays.

A MacBook logic board on a preheater with flux applied to a chip site during rework
Flux on the pads and the board up to temperature. This is the part a shop without a rework station has to send away.

A logic board is a few hundred components on a multi-layer circuit board. When a MacBook will not switch on, an iPhone will not charge or a screen stays black, the cause is nearly always one of those components — a power IC, a shorted capacitor, a corroded connector — rather than the board as a whole.

Board-level repair means finding that component and replacing it. The board is measured rail by rail against its schematic, shorts are located by current draw and thermal camera, and the failed part is lifted and replaced under a microscope with controlled hot-air rework. It takes skill and equipment, which is why many shops replace the whole board instead. Repairing it costs less, keeps your serial number, and on modern Macs and iPhones is the only way to keep the data that lives on the board.

What we fix

Board-level repairs we handle

Liquid damage & corrosion

Ultrasonic clean, corrosion removal and rebuild of every rail the liquid reached.

Short circuits & no power

Power rails traced with a meter and thermal camera until the shorted component is found and replaced.

Chip & IC replacement

MOSFETs, fuses, charging ICs, PMICs and driver chips replaced under the microscope, with BGA rework where needed.

Backlight & display circuits

Backlight, T-CON and display-driver faults fixed on the board, not by swapping the whole screen.

Port & connector repair

Corroded or torn USB-C, Lightning, MagSafe and battery connectors replaced.

Data from dead boards

Where a board cannot be saved, repaired far enough to get your files off it first.

By model

Common Board-level faults we see

MacBook

  • No power, no charge light, no fan
  • Liquid damage and corrosion under the shields
  • Backlight and display-driver circuits
  • Torn or corroded USB-C, MagSafe and battery connectors

iMac and Mac mini

  • No power traced past the power supply to the board
  • Display circuits on the iMac

iPhone and iPad

  • Charging-IC faults
  • Boot loops and dead phones
  • Baseband faults causing "No Service"
Prices & turnaround

What it costs and how long it takes

RepairModelPriceTurnaround
Liquid damage & corrosionMacBook, iPhone, iPadFree quote2–4 working days
No power / short circuitMacBook & desktop MacsFree quote2–4 working days
Backlight & display circuitMacBookFree quote2–4 working days
Charging port & connectorMacBook, iPhone, iPadFree quote2–4 working days

The final price is a fixed quote, given after the free diagnosis and before any work starts. Nothing is repaired until you approve it.

FAQ

Questions about Board-Level Repair

Something not covered here? Call or WhatsApp — we answer honestly, even when the answer is that it is not worth repairing.

See all questions

A board replacement swaps the whole logic board for a new one. Chip-level repair finds the component that failed and replaces only that. The second costs less and keeps your original board, serial number and data.

When it is done properly, yes. The repaired circuit is tested under load before the device leaves, and the repair carries our 90-day warranty.

Severe corrosion across several layers, a cracked board or a failed processor can put it beyond economic repair. If that is the case we say so, and the diagnosis that tells you is free.

Keep it off and bring it in. A board that has never had power through it while wet is the easiest kind to save.

Usually two to four working days. Liquid-damaged boards need cleaning and drying before they can be tested, and we test properly before handing them back.

Yes. On M-series and T2 Macs and on iPhones the storage is part of the board, so repairing that board is what keeps your data. A replacement board arrives empty.

Been quoted for a new logic board? Get a second opinion first.

The diagnosis costs you nothing, and if we cannot fix it there is no fee. Worst case, you find out exactly what is wrong with your device.

Book a repair

Tell us what happened

Fill this in, call, or send a photo on WhatsApp. The diagnosis is free either way.

Call us+91 75696 79419WhatsAppSend us a photo of the fault
WorkshopMNR Avenue, 1st Floor, Survey No. 82/P, Gachibowli Road, Silpa Gram Craft Village, Rai Durg, Hyderabad, Telangana 500032
Technician reseating display and board flex cables inside an opened MacBook
Flex cables reseated by hand during reassembly. Connectors this fine are where rushed repairs go wrong.
Opening hours
Monday
10:00 am – 8:00 pm
Tuesday
10:00 am – 8:00 pm
Wednesday
10:00 am – 8:00 pm
Thursday
10:00 am – 8:00 pm
Friday
10:00 am – 8:00 pm
Saturday
10:00 am – 8:00 pm
Sunday
Closed
How would you like to do this?

No charge for the diagnosis. We use your number only to discuss this repair. See our privacy notice.

Call WhatsApp Free pickup